Warning: Declaration of Suffusion_MM_Walker::start_el(&$output, $item, $depth, $args) should be compatible with Walker_Nav_Menu::start_el(&$output, $item, $depth = 0, $args = Array, $id = 0) in /customers/f/f/3/journeyman.se/httpd.www/wp-content/themes/suffusion/library/suffusion-walkers.php on line 17
Nov 302011
 

I have previously written about my attempts to create a very energy efficient fridge and freezer. The idea was to integrate the hull as a heat exchanger in the compressor/evaporator circuit. I had some initial discussions with a cooling technician about this. However he was not very happy when he saw the actual installation.

The pipes were too high diameter, and the vertical distance between the compressor and the heat exchanger was too big. We decided to try doing it anyway, but adding some extra oil into the system to compensate for the large gas volume in the pipes. But in the end it was not really working very well. And the extra oil was causing problem with temporary clogging in the capillary pipes.

So I had to face up to the fact that the idea was good but the execution of it was not good enough. Very well, that is a lesson learned about how to do it for the next yacht. For this one, I had to replace the installation with a working one.

The next better choice was to have water cooled compressors with a circulation pump. This draws about 12W more than my original concept, but it is a standard product that works and is easy to install. So we replaced the old system with this one. In the image below we’re halfway through the install, you see one old compressor and one new.


  One Response to “Admitting defeat.”

  1. This is dogfooding at it’s finest. Apparently unlike what the rest of the crowd is doing.